Mecer 1000VA Off-Line UPS With AVR Monitoring Software & Cable

Mecer line interactive UPS ( also refferred to as off-line UPS)

ME-850-VU

Mecer 850VA OFF-LINE UPS (with AVR,Monitoring Software + Cable & Built-in Surge Protection) – Black

Specification:
– Microprocessor control guarantees high reliability
– Boost and buck AVR for voltage stabilization
– Auto restart while AC is recovering
– Simulated sine wave
– Off-mode charging
– Cold start function
– USB communication port and RJ-11/RJ-45 protection
– Overload, discharge, and overcharge protection

– Supports Windows 2000/2003/XP/Vista/2008, Windows 7, Linux, Unix, and MAC

NO Dedicated Power cord with kettle plug (sold separately)

Note:
A UPS is not designed to provide continuous power, merely a window period that allows a computer or other user to finalise the work at hand and shut down. It’s ability to do this is dependent on the number of devices connected to the UPS.
To establish what you can and cannot connect, calculate the total wattage you need to supply and ensure that the UPS you purchase meets that requirement.

What’s in the box
1x UPS Unit
2x Male to Female Extension Power Cord IEC C13-C14 Serial (From UPS to PC)
1x USB cable (From UPS to PC)

Mecer has been one of South Africa’s top-selling PCs over the past two decades. Mustek’s ongoing interaction within the international IT industry has ensured that Mecer has remained a techno-leader at the forefront of technology.

Features:
– Simulated sine wave inverter
– Built-in AVR for voltage regulation
– Wide input voltage range: 90-280 VAC
– 12VDC available
– Overload and short circuit protection
– LCD display for comprehensive information

Specifications:
– MODEL Mecer IVR-1200LBK
– CAPACITY 1200 VA / 720 W
– POWER FACTOR 0.8
– Input Voltage range 90-280VAC

Line Mode:
– Output Voltage
– Bypass mode: 0utput voltage same as input voltage
– AVR mode:Output voltage = Input voltage 1.2 at Input voltage – Output Frequency Same as input

Battery Mode:
– Output Voltage 230Vac +/-10%
– Transfer Time 20ms typical
– Waveform Modified Sine-wave

Overload Capability:
– Bypass Mode (in VA and Watts) Load >110%+/-15% , alarm 5 mins then fault
– Load >130% +/-15%, fault immediately.
– AVR Mode (in VA and Watts)at Input voltage > 170VAC Load >100%+/-15%, go to bypass mode
– AVR Mode (in VA and Watts)at Input voltage 60%+/-15%, go to bypass mode
– Battery Mode (in W) Load>110% +/-15%, overload alarm for 15s, and then will switch to fault mode for 10s. Then unit will re-start for 5 times Load>120% +/-15% , fault & cut off O/P immediately.

Short Circuit Protection:
– Line Mode Breaker
– Battery Mode Current limit +Firmware Protection

Battery:
– Battery Voltage 12VDC
– Acceptable Battery Type Rechargeable lead-acid battery, Deep discharge battery
– Polarity Reserve Protection Yes
– Charger available I/P range 90 280V

Charger:
– Constant Current Charger Voltage 14.3VDC +/-2%
– Floating Charge Voltage 13.7VDC +/-2%
– Maximum Charge Current 10A or 20A
– DC Start Voltage >11VDC

Physical:
– Dimension, D X W X H (mm) 350 x 90 x 300
– Net Weight (kgs) 4.5

Environment:
– Operating Humidity 0 to 90% Relative Humidity(Non-condensing)
– Operating Temperature 0 degrees C to 40 degrees C
– Storage Temperature -15 degrees C to 50 degrees C